Technical Data Sheet for Construction Glue

Technical  Data  Sheet for Construction Glue

Technical Data

Composition:   Synthetic Resins

Appearance  clear and colorless block solid

Toxicity:      none

R&B softening point: approx. 80°C

Brookfield viscosity120--------about 8000 mps

                                 140-------about 4200 mps

                                 160-------about 1900 mps

                                180℃-------about 900 mps

Density:            0.98 g /cm3

Application Instructions

Its adhesion performance will be affected by substrates, release paper and application environment, so trial run is necessary to determine whether the adhesive is suitable.

There should be no dust or oil on the surface of substrates and release paper, also the substrates and release paper should be treated to constant temperature and humidity before application.

   Recommended application temperature140-170

Application methods: slot, spiral spray, fiber spray, Fine line, etc.

Packaging and Storage

Shelf Life: 12 Months in dry and cool environment

Packaging: 20kg/carton, 0.83kg/cake, wrapped with fusible films


         The residual adhesive can be rubbed off by wooden shovel before it is totally cooled. Cooled glue can be cleaned with specialized detergent. Applicators can be cleaned with mineral oil at 120℃, then purged with hot melt adhesive.


            Don’t mix the product with other adhesives.

 Keep the adhesive containers covered to avoid dust or contamination.

Use it with adequate ventilation to remove any hot melt fumes or vapors that are generated

Wear safety glasses, safety gloves and safety clothes when using hot melt adhesive to avoid scald.