Colorless Low Temperature Odorless Petroleum Resin Positioning Adhesive Glue Position Hot Melt Glue for Panty Liners Production
Colorless Low Temperature Odorless Petroleum resin positioning adhesive glue Position Hot Melt Glue for Panty Liners production
DESCRIPTION Hot Melt Adhesive
FEATURES Positioning Adhesive for sanitary protection products.
Developed for PE baffle pads but may have utility on some NW wrapped products.
·Good low temperature performance
·Light yellow color
Brookfield Viscosity (ASTM D3236) R&B Softening Point (ASTM E28)
About 2550 mPa.s @ 160℃ About 75 ℃
Gardener Color (ASTM D36) Suggested Running Temperature
About 2.5 150 – 160 ℃
|STORAGE||Can be stored 12 months in a clean dry place, in its original package at an average temperature of 25℃ or below. Storage temperature should not exceed 35℃.|
|CLEAN-UP||Mineral oil or paraffin wax, not to exceed flash point as stated on the MSDS, followed by a thorough purge with the adhesive itself.|
|PACKAGING||Available in film wrapped block (about 1kg).|
MSDS should be consulted for proper handling before use.
Wear safety gloves and goggles when handling molten adhesive.
TEP 960 compositionally complies with FDA 175.105.
1.Q .What is the material for hot melt glue postion adhesive?
A . Resin.
2.Q .What is the brand ?
A . We are the agency of Henkel and HB fuller.
3.Q .What about the delivery time ?
A.within 7-10 days after receiving the 30% deposit.
4.Q .What is your hot melt glue position adhesive price ?
A .our price is absolutely competitive and we are offering an additional discount depending on your quantity.
If you're looking for colorless low temperature odorless petroleum resin positioning adhesive glue position hot melt glue for panty liners production, please be free to buy the high quality products at competitive price with us. As one of the leading Position Adhesive manufacturers and suppliers in China, we're always at your service. For free sample, contact us now.